Minimum Platform Height
41' ground to platform floor.
Working Range
46' max. height and 29' max. side reach with boom horizontal.
Work Platform
48 ” x 24” molded fiberglass bucket with 2 access steps. Equipped with one safety harness lanyard attachment loop. One safety harness with 72" lanyard provided. Standard rating 350 lbs.
Platform Leveling System
Hydraulic "closed" system consisting of a platform cylinder interacting with a boom-actuated master cylinder mounted at the knuckle between the upper and lower booms. System provided with factory-set relief valves to compensate for oil expansion or overload during platform leveling operation. Remote releveling controls provided in platform and at ground controls to give precise releveling capability.
Platform Controls
Single stick control at bucket for metering of hydraulic control valve on side of bucket. The boom ground controls are mounted on the turret. Hydraulic oil is supplied to remote controls through hoses in center of turret to an internal cable carrier inside of the boom.
Lower Controls
Mounted on curbside of turret.
Pedestal
Aerial turret box shall be subframe mounted to the chassis of the carrying vehicle by bolting.
Turret
Reverse offset turret is one-piece weldment. Turret rotates on shear ball bearing.
Rotation
Continuous turret rotation with no stops. Hydraulic motor drives turret through self-locking gear box.
Boom
Upper, lower, and telescoping boom sections made of steel rectangular tube. Assembly includes heavy-duty cylinder fittings, pivot pins, and replaceable wear pads.
Boom Extension
One 2 " internal cylinder extending the outer boom section.
Lift
Lower boom with double-acting 5 " cylinder and upper boom with double-acting 3-1/3” cylinder, provides smooth and stable boom elevation. Holding valve prevents boom from falling in event of hose failure.
Cylinders
All cylinders use micro-honed cylinder tubing, chrome shafts, top grade packing and protective rod wipers. Cylinder-mounted holding valves provided on all load holding cylinders.
Hoses
High pressure hose is wire braid reinforced with a minimum safety factor of 4 to 1.
Oil Tank Capacity
15 Gallon mounted within pedestal.
Hydraulic System
Operating pressure approximately 2,500 PSI. System is parallel open-center type and is equipped with liquid-filled pressure gauge. Oil is supplied to upper cylinders through hoses in center of turret to an internal cable carrier inside of the boom.
Pump
Gear type, PTO or belt driven to truck. 9 GPM @ 2,500 PSI on high engine speed.
PTO
Heavy-duty, high-speed. Cable engaged from cab.
Cab Equipment
PTO cable with indicator lights installed in truck cab. Engine speed control and start/kill installed with control switches in platform remote control box and lower control box. U/L approved 5:BC dry chemical fire extinguisher installed in truck cab.
Operators Manual & Video
Two copies of operation, maintenance, safety and parts manual provided with each unit. Operational and safety video provided at delivery.
Installation
Unit installed on customer's truck, painted, system and tank filled with oil, tested, inspected, certified and ready to operate.
Standard Paint
Paint Hi-Reach white, and outriggers, bed and boxes black. Top of bed painted with black nonskid surface.
Bumper
Bureau of Motor Carrier Safety rear bumper.
Weight
Approximately 7,000 lbs. with 12' steel floor bed less truck.
Truck Chassis
Approximately 84 " C.A., 6,000 lb. front axle and 13,500 lb. rear axle, and 17,500 lb. GVWR required. Recommended GVWR is minimum for HI-REACH with flatbed only. Contact factory when additional equipment is to be added. |
